PREFABRICATED PACKAGE RECEIVERS

The smallest package receivers are “transaction drawers” welded from stainless steal, these slide through the bullet resistant barrier.  Prefabricated drawers are available in sizes ranging from a large shoebox to drawers that can easily accommodate a gallon jug.  Settings where clerks and customers handle a few bulkier items–such as in pharmacies and convenience stores–are well served by these prefab drawers.

BULLET RESISTANT PACKAGE RECEIVER

Other businesses–such as post offices, shipping companies, and large receiving offices–can expect to spend much of the day handling bulkier packages.  This calls for a full-fledged package receiver.  These large rectangular bullet-resistant portals have interlocking doors, one on either side of the bullet-resistant barrier.  The interlocking mechanism assures that only one of the doors can be open at a time.  Such receivers are generally made from either welded stainless steel or 1 1/4 inch thick acrylic.  For even larger and heavier items businesses can opt for a prefabricated rotary package receiver, or “lazy susan.”  These largest package receivers (up to four cubic feet) use a rotating drum or turntable to securely pass goods between staff and visitors.

CUSTOM PACKAGE RECEIVERS

High volume businesses dealing with many large or awkward items often decide that no prefabricated unit is going to cut it.  Total Security Solutions rises to these occasions, from the exotic to the mundane.

Fast-food restaurants in high-crime areas pose a special challenge.  As Total Security Solutions vice president Jim Richards points out, “They’ve got to be able to do their business, and it’s fast food, so the bullet proof system can’t be slowing them down.”  Quick-serve restaurants demand package receivers that can be easily operated by harried staff, and offer the capacity to transfer a food tray or chicken bucket smoothly enough to avoid knocking over the super-sized beverage. . . . → Read More: Prefabricated and Custom Package Receivers]]> If you’re handling anything beyond slips of paper–cash, credit card receipts, concert tickets, etc.–you’re going to have to move up from the  “deal trays” familiar from banks, credit unions, and entertainment venues, to full-fledged “package receivers.”

PREFABRICATED PACKAGE RECEIVERS

The smallest package receivers are “transaction drawers” welded from stainless steal, these slide through the bullet resistant barrier.  Prefabricated drawers are available in sizes ranging from a large shoebox to drawers that can easily accommodate a gallon jug.  Settings where clerks and customers handle a few bulkier items–such as in pharmacies and convenience stores–are well served by these prefab drawers.

BULLET RESISTANT PACKAGE RECEIVER

Other businesses–such as post offices, shipping companies, and large receiving offices–can expect to spend much of the day handling bulkier packages.  This calls for a full-fledged package receiver.  These large rectangular bullet-resistant portals have interlocking doors, one on either side of the bullet-resistant barrier.  The interlocking mechanism assures that only one of the doors can be open at a time.  Such receivers are generally made from either welded stainless steel or 1 1/4 inch thick acrylic.  For even larger and heavier items businesses can opt for a prefabricated rotary package receiver, or “lazy susan.”  These largest package receivers (up to four cubic feet) use a rotating drum or turntable to securely pass goods between staff and visitors.

CUSTOM PACKAGE RECEIVERS

High volume businesses dealing with many large or awkward items often decide that no prefabricated unit is going to cut it.  Total Security Solutions rises to these occasions, from the exotic to the mundane.

Fast-food restaurants in high-crime areas pose a special challenge.  As Total Security Solutions vice president Jim Richards points out, “They’ve got to be able to do their business, and it’s fast food, so the bullet proof system can’t be slowing them down.”  Quick-serve restaurants demand package receivers that can be easily operated by harried staff, and offer the capacity to transfer a food tray or chicken bucket smoothly enough to avoid knocking over the super-sized beverage.

Each Job is a Special Challenge

According to Total Security Solutions vice president Jim Richards, “One of the things a lot of companies struggle with, but we’ve really grown to enjoy, is that you have to keep in mind that every single job is different.  When you walk into a pharmacy, you can’t think of any of the banks or the gas stations that you’ve done; it’s a completely different operation.”

One advantage to retrofitting is that you can see how workers actually interact with the existing space.  A good system provides security without complicating interactions and work flow.  Jim points out that “you always have to think about how the person who is going to be behind the bullet proof panels functions and operates day-to-day. How can we design this system to allow him to continue to do what he does without impeding him?”

Making a Pharmacy Bullet Proof

As an example, Jim points to pharmacies–especially since independent pharmacies increasingly find themselves in need of a bullet proof system.  For practical and security reasons a pharmacy’s workspace is very constrained: tiny built-in desks must hold scales, computers, a cash register, and so on.  Generally, customers come in at the far right of the platform, hand over a prescription, and then flow left as the pharmacist dispenses or prepares a compound.  This is finally handed to the customer through a separate pick-up window at the far left.  It might seem that securing the space is as easy as closing off the platform with bullet resistant fiberglass panels and installing bullet proof transaction at either end.

But in practice pharmacists talk to customers throughout the dispensing process: Would you like a generic or name brand? Would you prefer an easier to swallow pill or gel-cap? Does your child like cherry- or grape-flavored syrup? Closing off the platform with bullet . . . → Read More: Retrofitting with Bullet Proof Panels and Glass]]> In the past bullet proof installation was entirely a matter of adding bullet resistant panels and windows to existing structures. Even though many modern buildings are now designed with bullet proof security in mind, half the work done by Total Security Solutions continues to be retrofitting.

Each Job is a Special Challenge

According to Total Security Solutions vice president Jim Richards, “One of the things a lot of companies struggle with, but we’ve really grown to enjoy, is that you have to keep in mind that every single job is different.  When you walk into a pharmacy, you can’t think of any of the banks or the gas stations that you’ve done; it’s a completely different operation.”

One advantage to retrofitting is that you can see how workers actually interact with the existing space.  A good system provides security without complicating interactions and work flow.  Jim points out that “you always have to think about how the person who is going to be behind the bullet proof panels functions and operates day-to-day. How can we design this system to allow him to continue to do what he does without impeding him?”

Making a Pharmacy Bullet Proof

As an example, Jim points to pharmacies–especially since independent pharmacies increasingly find themselves in need of a bullet proof system.  For practical and security reasons a pharmacy’s workspace is very constrained: tiny built-in desks must hold scales, computers, a cash register, and so on.  Generally, customers come in at the far right of the platform, hand over a prescription, and then flow left as the pharmacist dispenses or prepares a compound.  This is finally handed to the customer through a separate pick-up window at the far left.  It might seem that securing the space is as easy as closing off the platform with bullet resistant fiberglass panels and installing bullet proof transaction at either end.

But in practice pharmacists talk to customers throughout the dispensing process: Would you like a generic or name brand? Would you prefer an easier to swallow pill or gel-cap? Does your child like cherry- or grape-flavored syrup? Closing off the platform with bullet proof panels forces the pharmacist to run to either end and call for the customer’s attention.  The platform needs to have bullet resistant glass windows along its length, each with a talk-thru.

Likewise, although a cash tray is just fine for handing a prescription slip or payment to a pharmacist, prefabricated cash trays are often too shallow to pass bottles or packaged antibiotics.  A prefabricated rotary suzanne or package passer can do the job, but these take up a lot of space. Even smaller custom package passers can be cumbersome to a busy pharmacist.  Jim found that “when possible, pharmacists would rather just slide a prescription through the cash tray.  We decided to design a taller, deeper cash tray, so they can pass the pills through that while completing the transaction.”

The Biggest Retrofitting Challenge

Banks call for a similar sensitivity to the customer interactions that make up day-to-day business, especially clear voice transmission.  And the importance of maintaining clear lines of sight for security systems and personnel favors ballistic glass over adding lots of walls with bullet proof panels.

But the biggest challenge is in bullet proof security retrofitting a gas station.  Like a pharmacy, it’s a tight work space serving a small retail floor crammed with merchandise.  As in a bank, clerks need to be able to chat with customers and want clear lines of site.  But, in contrast to banks and pharmacies, most gas stations that need bullet proof panels and windows run on a 24-hour schedule.  “We have a very limited window during which we can shut down that transaction area”, Jim says, “You try to work as fast as you can because you know that customer is loosing money if he’s down.”

Items like package passers are great for larger items such as UPS packages, bottles and other bulky items but they aren’t the best option when it comes to passing the most common item of all in a place of business, money. Currency trays are one of the most important items in a transaction area and they are often one of the last things on a person’s mind when it comes to ordering their bullet resistant products.

The three most common currency trays that you’ll see in banks, check cashiers, pawn shops and some convenience stored and gas stations are the standard currency tray, the flip lid and sliding currency tray. The standard tray comes in five different sizes and two different variations in which both have custom sizes available. They can either be recessed in a countertop or mounted on the top. All standard trays are also available with a bullet trap system that lets a bullet travel through the tray and in to a confined area to trap the bullet. The flip lid tray is often used in some exterior applications and is very similar to the standard tray, just with covers over the openings and a flat bottom to the tray. These trays are available in one size along with custom sizes as well. The sliding currency tray is very similar to the flip lid tray in terms of shape and functionality. The sliding tray has a lock on the employee side for added security and allows for some larger, bulkier items (such as cigarette cartons) to be passed without an issue. The sliding tray is available in one size as well as custom sizes as well. All of these types of currency trays can be installed in to any transaction window and are great for many different applications.  

Below are the available standard sizes for all currency tray:

Standard                     Flip Lid                                  Sliding

Counter Recessed      Counter Recessed                  Counter Recessed

12″ x 8″ x 1-1/2″           14-1/2″ x 16-1/2″ x 2-3/4″         14″ x 14″ x 2-3/4″ 14″ x 8″ x 1-1/2″ 16″ x 8″ x 1-1/2″ 14″ x 13″ . . . → Read More: Passing Pennies (Quarters, nickels and Dimes)]]>

Currency Tray from Total Security Solutions

Items like package passers are great for larger items such as UPS packages, bottles and other bulky items but they aren’t the best option when it comes to passing the most common item of all in a place of business, money. Currency trays are one of the most important items in a transaction area and they are often one of the last things on a person’s mind when it comes to ordering their bullet resistant products.

The three most common currency trays that you’ll see in banks, check cashiers, pawn shops and some convenience stored and gas stations are the standard currency tray, the flip lid and sliding currency tray. The standard tray comes in five different sizes and two different variations in which both have custom sizes available. They can either be recessed in a countertop or mounted on the top. All standard trays are also available with a bullet trap system that lets a bullet travel through the tray and in to a confined area to trap the bullet. The flip lid tray is often used in some exterior applications and is very similar to the standard tray, just with covers over the openings and a flat bottom to the tray. These trays are available in one size along with custom sizes as well. The sliding currency tray is very similar to the flip lid tray in terms of shape and functionality. The sliding tray has a lock on the employee side for added security and allows for some larger, bulkier items (such as cigarette cartons) to be passed without an issue. The sliding tray is available in one size as well as custom sizes as well. All of these types of currency trays can be installed in to any transaction window and are great for many different applications.  

Below are the available standard sizes for all currency tray:

Standard                     Flip Lid                                  Sliding

Counter Recessed      Counter Recessed                  Counter Recessed

12″ x 8″ x 1-1/2″           14-1/2″ x 16-1/2″ x 2-3/4″         14″ x 14″ x 2-3/4″
14″ x 8″ x 1-1/2″
16″ x 8″ x 1-1/2″
14″ x 13″ x 2-1/2″
14″ x 17″ x 1-3/4″

Counter Recessed with Bullet Trap

12″ x 8″ x 1-1/2″
14″ x 8″ x 1-1/2″
16″ x 8″ x 1-1/2″
14″ x 13″ x 2-1/2″
14″ x 17″ x 1-3/4″

Counter Mount

12″ x 8″ x 2″
14″ x 8″ x 2″
16″ x 8″ x 2″

***Custom Sizes are available for all currency trays***

There are other variations of currency trays available to customers to fit their needs. For more information view our website or call Total Security Solutions today.

Like the PE Package Passer (See last week’s blog) the Rotary Package Processor is a great option for convenience stores. However, unlike the PE, the Rotary Package Processor is the perfect option for fast food operations, restaurants and gas stations. This type of Package Processor allows many different (and larger) sized items to be passed back and forth between customers and employees. Like the PE, the Rotary Package Processor is only accessible from one side at a time, meaning that there is not breech possibility   

The Rotary Package Processor has many features that are available as well, things such as additional locking mechanisms, integral cash tray protective barriers and three different levels of protection. The Rotary Package Passer comes in one standard size (Box OD 18″ W x 20″ H x 14″ D) as well as custom sizes per customer request and is available in three levels of protection.

For more information on Rotary Package Passers including available sizes and levels of protection click here.

The PE Package Passer also uses an interlocking mechanism whereby only one door may be opened at a time, either on the employee or customer side. Designed for moderate to frequent use, the PE Package Passer is built from transparent bullet resistant material and requires little or no maintenance.

View a product demonstration of the PE Package Passer.